Model 200 Packing Glands

Model 200


Body, Cap, Jam Nut 303 Stainless Steel
Insert, Follower 6061-T6 Anodized Aluminum
Grommet Flurocarbon, 57 Durometer

If a plain hex cap without conduit connection is required add prefix "H-" to the assembly number found below. Overall length is reduced by .90". 

Model 200 Assembly Numbers

.156 Grommet Wire Hole Diameter

1 Wire 2 Wire 3 Wire 4 Wire 6 Wire
Model 200 1 Wire Model 200 2 Wires Model 200 3-wire Model 200 4 Wires Model 200 6 Wires
221A 222A 223A* 224C

* For vibration probes. Uses split grommet, assembly screw, and internal design.
** For vibration probes. Uses split grommet and two piece insert and follower.